Catering highloader Scaling platform

Catering highloader Scaling platform

Catering highloader movable small platform is driven by hydraulic cylinder, and a photoelectric sensor switch is installed under the collision pipe of the telescopic platform on the left and right sides, the telescopic platform stops moving immediately after the switch senses the cabin door within the set safety distance.

Catering highloader The upper limit touch switch is installed at the 45°angle above the left and right ends of the telescopic platform collision avoidance tube, the touch switch contact whiskers protrude out of the collision avoidance hose ≧ 10cm, and the carriages stop rising immediately when the touch switch touches the objects. Horizontal tentacle limit switch is installed at the left and right ends of the platform collision avoidance hose, and the platform stops moving left and right when it touches an object.

Left and right movable platform three-dimensional explosion; 'vertical movable platform three-dimensional explosion; fixed platform three-dimensional explosion

Catering highloader technical parameters

Vehicle length × width × height (mm): 10500 × 2500 × 3700

Wheelbase (mm): 5550

Total mass (kg): 19990

Platform working height (mm): 2550-6100

Minimum ground clearance (mm): 210

Rated load capacity of cabin (kg): 6000

Rated load of front platform (kg): 2500

Rated load of movable part of front platform (kg): 700

Rated load capacity of fixed part of front platform (kg): 1800

Front platform movable part left-right adjustment range (mm): 0-700

Size of fixed part of front platform (L×Wmm): 2050×2265

Front platform movable part (telescopic adjustment range mm): 0-600

Size of movable part of front platform (L×W): 950×1200

Internal dimensions of the compartment (L×W×H mm): 6750×2360×2200

Compartment external dimensions (L×W×H mm): 7500×2500×2400

Temperature range (°): -40-67

Total voltage V: 540.96

Total energy storage power Kwh ： 281.92

Rated power/speed kw/r/min ：100/1270