#Industry News
Electric Airport ambulift safety interlock
Electric Airport ambulift safety interlock
(1) Electric Airport ambulift cab
1) It is equipped with an engine start switch and a working indicator light.
2) It has an indicator light for the retraction of the support legs.
3) It has a temperature display for the refrigeration unit and a temperature control panel.
4) It has a monitoring system display.
5) For passengers with mobility issues, the automatic passenger boarding vehicle is equipped with the following indicator lights: oil temperature indicator light, gear shift inhibition indicator light, maintenance indicator light, and fault indicator light.
6) According to different customer requirements, the cab can be equipped with the following switches: emergency light switch, cabin lighting switch, system power switch, support leg retraction switch. Special requirements should be specified during ordering.
(2) Electric Airport ambulift ground operation box
1) This operation box is located at the left front and left rear support legs.
2) The standard ground operation panel is equipped with buttons for the retraction and release of the support feet, buttons for the lifting and lowering of the body, a power switch, a panel lighting switch, an emergency electric pump switch, an emergency stop button, a protection release switch, an indicator light for the support feet to be fully placed, and an indicator light for the body not to be fully lowered.
3) According to different customer requirements, the ground operation panel can be equipped with the following switches or indicator lights: engine start indicator light, power indicator light, etc.
(3) Electric Airport ambulift cabin operation box
1) This operation box is located on the right side of the cabin, and the fixed position may vary depending on the type of cabin door. For cabins with rolling shutters, this operation box is located 1500mm from the right front of the cabin. For cabins with sliding doors, this operation box is located 1500mm from the right front of the front door frame.
2) The standard box body operation panel is equipped with buttons for platform extension and retraction and left and right movement, box body lifting and lowering, emergency electric pump, emergency stop, engine start, platform lighting switch, box body lighting switch, outrigger positioning indicator light and power indicator light.
3) According to different customer requirements, the cabin operation panel can be equipped with the following switches or indicator lights: platform not retracted到位 indicator light, emergency protection release switch, etc. Special requirements should be specified during ordering.
(4) Electric Airport ambulift safety interlock protection
Safety interlock protection
1) When the engine start is in operation, the transmission cannot be engaged and the vehicle cannot move.
2) The support legs cannot be retracted when they are not in place.
3) There is an audible and visual alarm device when the cabin is being lifted.
4) The cabin cannot be retracted when it is not lowered.
5) The cabin cannot rise or descend when the telescopic platform is not retracted.
6) A sound alarm signal is provided when reversing.
7) The buttons for lifting the body and extending the support feet cannot be operated separately. There are interlocking buttons, and they must be operated simultaneously to function.
8) The cabin cannot be raised when the support legs are not retracted.
9) A proximity switch is installed in the rubber cylinder of the front platform, with a sensing distance of 100mm.
10) The cabin's internal and external control of the cabin lift device is interlocked.
11) Two limit switches are installed on the left and right sides of the front platform rubber cylinder, with an upward angle of 45 degrees. When an object is touched, the cabin cannot rise.