video corpo

Havas, New Istanbul Airport

F.Vogels
Add to MyAeroExpo favorites

Project highlights

Havaş an affiliated company of TAV Airports, has doubled its footprint in Istanbul after making the move from Atatürk Airport to the new Istanbul Airport. The Turkish ground handler is operating 40,000 square meters of indoor and outdoor area's at Istanbul Airport. Saco was awarded to supply the ULD Handling Equipment for its Cargo Handling operations.

Saco's Scope of Supply

- 650 m² Castor Decks

- 35 Motor Powered Roller Decks

- 2 Right Angle Decks

- 6 Lowering Build-up / Break-Down work stations (10ft)

- 2 Lowering Build-up / Break-Down work stations (20ft)

- 2 Truck Docks 20ft

- 8 Weighing Scales

Saco Castor decks at Havaş
Saco Castor decks at Havaş

Castor decks Non-powered modular deck for multi-directional manual conveying and storage of ULD’s. The standard 10ft module has dimensions of L x W: 3315 x 2600 mm, however these can be modified according to the required system lay-out. The standard 10ft module has a capacity of 6800 kg and a conveying height of 508 mm (20” dolly height). Castor deck modules consist of a hot-dipped galvanised steel frame with durbar deck plates in which the swivel cargo castors are installed. An average of 14 castors are fitted per square meter.

Spider Setup

Motor powered roller decks are used for automatic conveying and/or storage of ULD’s. They can also be installed on Truck Docks, Build-up / Break-down workstations, (elevating) transfer vehicles, etc. 10 ft roller decks can accommodate ULD’s of maximum 10 ft base size with dimensions: L x W: 125 x 96 inch (3,175 x 2,438 mm) and weight 15,000 lbs (6,800 kg). The Right Angle Deck in the middle is designed to transfer loads right angled (lateral) to the primary longitudinal movement by interchanging the operating heights of two conveyor decks. This motion is accomplished by lifting a partially motor powered wheel deck vertically through a motor powered roller deck. The combination of these two decks provide conveying at right angles to each other. The interchanging mechanism is electro-mechanically operated. The Right Angle Deck is suitable for ULD’s with maximum 10 ft base size with dimensions: L x W: 125 x 96 inch (3,175 x 2,438 mm) and weight 15,000 lbs (6,800 kg). On the sides Build-up / Break-down workstations are placed, these each consists of a hydraulic operated scissor lift with a roller deck to be installed in a concrete pit. The workstation operates at variable heights between 508 mm above floor level and 1,500 mm below floor level.

Spider Setup

Motor powered roller decks are used for automatic conveying and/or storage of ULD’s. They can also be installed on Truck Docks, Build-up / Break-down workstations, (elevating) transfer vehicles, etc. 10 ft roller decks can accommodate ULD’s of maximum 10 ft base size with dimensions: L x W: 125 x 96 inch (3,175 x 2,438 mm) and weight 15,000 lbs (6,800 kg). The Right Angle Deck in the middle is designed to transfer loads right angled (lateral) to the primary longitudinal movement by interchanging the operating heights of two conveyor decks. This motion is accomplished by lifting a partially motor powered wheel deck vertically through a motor powered roller deck. The combination of these two decks provide conveying at right angles to each other. The interchanging mechanism is electro-mechanically operated. The Right Angle Deck is suitable for ULD’s with maximum 10 ft base size with dimensions: L x W: 125 x 96 inch (3,175 x 2,438 mm) and weight 15,000 lbs (6,800 kg). On the sides Build-up / Break-down workstations are placed, these each consists of a hydraulic operated scissor lift with a roller deck to be installed in a concrete pit. The workstation operates at variable heights between 508 mm above floor level and 1,500 mm below floor level.

Spider Setup

Motor powered roller decks are used for automatic conveying and/or storage of ULD’s. They can also be installed on Truck Docks, Build-up / Break-down workstations, (elevating) transfer vehicles, etc. 10 ft roller decks can accommodate ULD’s of maximum 10 ft base size with dimensions: L x W: 125 x 96 inch (3,175 x 2,438 mm) and weight 15,000 lbs (6,800 kg). The Right Angle Deck in the middle is designed to transfer loads right angled (lateral) to the primary longitudinal movement by interchanging the operating heights of two conveyor decks. This motion is accomplished by lifting a partially motor powered wheel deck vertically through a motor powered roller deck. The combination of these two decks provide conveying at right angles to each other. The interchanging mechanism is electro-mechanically operated. The Right Angle Deck is suitable for ULD’s with maximum 10 ft base size with dimensions: L x W: 125 x 96 inch (3,175 x 2,438 mm) and weight 15,000 lbs (6,800 kg). On the sides Build-up / Break-down workstations are placed, these each consists of a hydraulic operated scissor lift with a roller deck to be installed in a concrete pit. The workstation operates at variable heights between 508 mm above floor level and 1,500 mm below floor level.

Spider Setup

Motor powered roller decks are used for automatic conveying and/or storage of ULD’s. They can also be installed on Truck Docks, Build-up / Break-down workstations, (elevating) transfer vehicles, etc. 10 ft roller decks can accommodate ULD’s of maximum 10 ft base size with dimensions: L x W: 125 x 96 inch (3,175 x 2,438 mm) and weight 15,000 lbs (6,800 kg). The Right Angle Deck in the middle is designed to transfer loads right angled (lateral) to the primary longitudinal movement by interchanging the operating heights of two conveyor decks. This motion is accomplished by lifting a partially motor powered wheel deck vertically through a motor powered roller deck. The combination of these two decks provide conveying at right angles to each other. The interchanging mechanism is electro-mechanically operated. The Right Angle Deck is suitable for ULD’s with maximum 10 ft base size with dimensions: L x W: 125 x 96 inch (3,175 x 2,438 mm) and weight 15,000 lbs (6,800 kg). On the sides Build-up / Break-down workstations are placed, these each consists of a hydraulic operated scissor lift with a roller deck to be installed in a concrete pit. The workstation operates at variable heights between 508 mm above floor level and 1,500 mm below floor level.

Castor Deck Area Outside and Motor Powered Roller Deck Setup

Castor Deck Area

Castor Deck Area with a Walkway

Motor Powered Roller Decks

Spider Setup, Build-up / Break-down, Motor Powered Roller Deck

Motor Powered Roller Decks

Associated Trend items

Related Searches