Pure electric aviation waste receiving vehicle (700P) undercarriage and dumpster

Pure electric aviation waste receiving vehicle (700P) undercarriage and dumpster

Pure electric aviation waste receiving vehicle chassis assembly is the foundation of the whole vehicle, its beams, diagonal support beams and foot support brackets are welded from rectangular steel tubes and bending box-shaped parts, and fixed on the chassis with U-bolts, four fixed straight support feet are bolted to connect with the foot beams. pure electric aviation waste receiving vehicle (700P) Pure electric aviation waste receiving vehicle The garbage compartment is composed of skeleton, skin, box cover and box door, with an effective volume of 20m³.

Pure electric aviation waste receiving vehicle Technical parameters

Overall voltage V: 618.24

Input voltage VDC: 540

Total energy storage capacity kWh : 106.95

Nominal output voltage VAC: 220

Nominal unit voltage V: 3.22

Control mode : Torque

Rated capacity of single unit 1h: 173Ah

Total length mm ：7895

Overall width mm : 2340

Overall height mm : 3300

Wheelbase mm : 3815

Wheelbase (front/rear) mm ：1685/1650

Front overhang mm ：1100

Rear overhang mm : 2340

Front extension mm : 643

Approach angle (°): 24

Departure angle (°): 14

Longitudinal passing angle (°): 16.5

Minimum ground clearance mm: 247

Outer diameter of passage circle mm: 16490

Total mass kg : 6200

Gross mass kg: 8300

Trash compartment volume m3 : 20

Maximum tilt angle ° ：36.5

Table lifting height mm ：2400~5800

Maximum speed km/h ：85

Allowable loaded garbage mass kg ：1900

Front platform telescopic range mm ： 0~800

Temperature range ℃: -35~65

Range km ：305