Add to favorites

#Industry News

disabled semi-piloted passenger lift aircraft working platform

disabled semi-piloted passenger lift aircraft working platform

WTJ5100JCR (disabled) passenger lift aircraft (semi-piloted) is suitable for all kinds of models with the height of the aircraft door between 1400 and 5800㎜, and serves for passengers with limited mobility to board and disemboard the aircraft.

disabled semi-piloted passenger lift aircraft working platform

1, the work platform is equipped with a pre-activity platform and a special lifting work platform for passengers with mobility difficulties.

2, the front work platform is always a frame type structure, with front and rear telescopic function, located at the top of the cab. The front working platform is composed of a fixed platform and a retractable platform. The front end of the front working platform is equipped with a buffer tube and a safety device for docking the aircraft door to avoid collision with the aircraft. A front platform is provided for docking the passenger aircraft door, and the platform can be raised and lowered according to the cabin door height requirements. Both sides of the front platform are provided with sliding railings and fixed railings, which do not hinder the opening and closing of the passenger plane door when the sliding railings are fully recovered. There is an awning above the front platform. The expansion capacity of the expansion platform is 600mm.

3, the rear working platform assembly, the rear lifting platform is a frame type structure, located at the rear of the vehicle. Rise and fall with the body. The rear lifting platform has the flip function, the platform side is rotary, with stainless steel pull-out armrests, which can effectively retreat the aircraft door. The rear lifting platform lifting and turning control switches are provided on the rear end of the chassis and the rear lifting platform. When the rear lifting platform does not work, the rear lifting platform can be folded up, fixed in the rear end of the car body, and a hydraulic lock is locked. When the car body drops to the lowest point, the platform will be supported by the support frame on the auxiliary beam and the car body. When the car body rises to the bottom and is level with the platform plane, the platform will rise and fall synchronously with the car. The front and back platform can stand area is > 3㎡, the front and back platform floor is made of patterned aluminum plate, with waterproof, anti-slip, anti-corrosion function. When not in use, the platform can be folded up, fixed to the rear end of the body, and locked by a hydraulic lock.

Details

  • Hang Kong Lu, Jian Hu Xian, Yan Cheng Shi, Jiang Su Sheng, China
  • Jiangsu Tianyi Aviation Industry Co., Ltd.