ESS Chamber Rapid temperature change testing at 15℃ per minute

Meet IEC 60068-2-14 and MIL-STD-810, empowering high-precision environmental simulation testing

A rate of 15℃/min sets a new industry benchmark:

The ESS Test Chamber (Environmental Stress Screening Chamber) leads the way with a linear temperature ramp rate of 15°C per minute, which is 50% - 400% higher than that of traditional equipment (typically 3-10°C per minute). Its core technological breakthroughs include:

Ultra-high rate stability: Maintains a ±0.5℃ fluctuation accuracy within the temperature range of -70℃ to +150℃, meeting the thermal failure analysis requirements for semiconductor chip packaging materials.

Military-grade reliability: Certified by the MIL-STD-810H military standard, supporting extreme verification of satellite components under sudden temperature changes (±15℃/min) in orbit;

Comprehensive coverage of international standards: compatible with IEC 60068-2-14, ISO 16750-4 (automotive electronics) and GJB150.5 (national military standard)

For the key demands in the three high-growth fields of new energy, semiconductors, and aerospace:

1.Battery power safety revolution

Simulated electric vehicle battery pack - Extreme cold and hot exposure cycle from -40℃ to 85℃ (temperature variation rate of 15℃/min) 3. Early detection of electrolyte leakage risk, with testing efficiency increased by 300% compared to traditional methods

2.Warning of failure of semiconductor Packaging materials

Achieve chip solder joints completed within 10 seconds - capable of withstanding extreme temperature changes ranging from -55℃ to 125℃. Precisely capture the expansion process of micro-cracks, resulting in a 22% increase in yield rate.

3.Aerospace environment simulation

Reproduce the sudden temperature change of 200℃/h in the low Earth orbit, providing a space-level verification environment for the satellite's optical components.

Industry authoritative certification: Endorsed by the world's top laboratories:

1.CNAS accredited laboratory: Conducted full-range verification from -70℃ to 150℃ with a rate of 15℃ per minute continuously

2.NIST traceable calibration: The temperature sensor accuracy is ±0.1℃ (3 times higher than the national standard)

3.Automotive Electronics AEC-Q104: Successfully completed 1000 cycle zero-fault tests

Professional walk-in altitude test chambers for aerospace/automotive R&D. CE/ISO certified, -70℃ to +150℃ range. Request specs & quote today!