Product Trends

The product line is available in two variants, the ZHR4150 and ZHR8150, to accommodate either classic Rockwell or combined Rockwell and Superficial Rockwell hardness testing respectively. These recently launched products build on the long-lasting quality and success of the previous ZHR series and feature innovative touchscreen displays to make Rockwell hardness testing ...

A team of innovators from NASA and The Ohio State University detailed the characteristics of the new alloy, GRX-810, in a peer-reviewed paper published in the journal Nature. “This superalloy has the potential to dramatically improve the strength and toughness of components and parts used in aviation and space exploration,” said Dr. Tim Smith of NASA’s Glenn Research Ce...

The kit consists of a lightweight battery-powered dispensing gun and mixer, along with a spare, rechargeable battery and charging accessories housed in a watertight, crushproof and dustproof case. Users can quickly and easily remove old sealant and apply fresh product without requiring the aircraft to be moved to a hangar. “We are pleased to offer this helpful tool kit ...

Unveiled last year at NBAA-BACE, the company uses cutting-edge chemistry to fuse traditional jewelry techniques with aerospace technology to create a decorative, highly-customizable material derived from high-performance natural fibers and a resin matrix. It can be produced in near limitless colors, textures, thickness, and patterns ranging from a metallic stingray skin ...

Category: Manufacturing Technology - sponsored by High Value Manufacturing Catapult Headline sponsor: Babcock International Group Project: Snakes Everywhere - from aerospace to medical and beyond Partners: Rolls-Royce Plc with the University of Nottingham Avoiding downtime is a priority for any engineering business. And for Rolls-Royce plc, whose pioneering “power by th...

Designated DTM 1710, the tool system employs inserts with polycrystalline diamond (PCD) cutting edges brazed onto cassettes that can be finely tuned axially to micron precision via adjusting screws on the tool carrier. The PCD substrate is precisely laser-cut to achieve high surface quality during the finishing process. Axial run-out is set by Horn engineers before the t...

However, with the updated version of its tried and tested EcoCut series, tooling specialist Ceratizit is now delivering high-performance solutions for the universal turning and drilling of ISO-P steels. The list of ISO-P steels is long and its diversity demands a wide range of high-performance tooling solutions. When low carbon, ductile and high-alloy steel grades of di...

The curved wiper edge sweeps over the machined surface again, making it possible to either double the feed rate and increase productivity by 100%, or to significantly improve the surface quality while maintaining the same feed rate. With these new geometries, Walter is now transferring this effect from the existing FW5 and MW5 double-sided cutting inserts to indexable in...

HSD provides complete solutions for 5 Axis Machine. Discover our range of 2 Axis Heads > n.17 Models of 2 Axis Heads > n.140 Electrospindles available > n.360 total versions HSD offer the widest range of Milling Heads in the market, with a plenty of technical features for various material process machining, from composite material to titanium. Below the vi...

Master Bond EP3HT-LO is a single component, non-premixed & frozen, heat cured epoxy, with an unlimited working life at room temperature. This system passes ASTM E595 tests for NASA low outgassing, making it well suited for use in the aerospace, electronic, microelectronic and optical industries. EP3HT-LO features a good strength profile, with a lap shear strength of 1,6...

What is an aeronautic leak tester and what is its primary function? A leak tester is a portable device, used in the pitot static maintenance process to identify if a leak is present in the pitot static system and to what level. This device must be able to generate pressure and measure if there is a system leak and at what rate. Druck's new DPI610E-Aero is a self-contai...

Baker Hughes, an energy technology company, announced Monday the launch of two new Druck calibration solutions designed to drive efficiency and performance across aviation ground test instrumentation. Responding to the aviation sector’s push for greater productivity, Baker Hughes’ new Druck technologies will improve turn-around-times across mandatory pre-flight aircraft...

This ASTM E-595 low outgassing rated product is designed for bonding applications where low stress is critical and is appropriate for use in vacuum environments. It can be utilized in the aerospace, electronic, opto-electronic, and specialty OEM industries. MasterSil 323S-LO offers flexibility and toughness, with a Shore A hardness of 35 to 55, a low tensile modulus of ...

Utilize competitive advantages! The 5‑axis machining center HSTM with horizontal workpiece arrangement is particularly suitable for machining turbine and compressor blades, blisks and/or centrifugal compressors. The UT-Tm®-Basic-Compact System device is used to monitor tools on cutting machines. The operation is very simple and only minor adjustments have to be made in ...

The refined HSTM 150 HD places us in a position where we can offer a fully-automated processing centre to the manufacturers of turbine and compressor blades for the aerospace industry. Materials with difficult machining characteristics that are key elements in the aerospace industry and in engine construction are precious metallic elements, and in view of greater sustai...

Master Bond Supreme 17HTND-2 is a toughened epoxy system for bonding and sealing applications. It is a true one component system, not premixed and frozen, with an unlimited working life at room temperature. Supreme 17HTND-2 is thermally stable, featuring a high glass transition temperature (Tg) of 410°F (210°C). It also meets NASA low outgassing specifications per ASTM E...

(Les Clayes-sous-Bois – France, July 2023) – Today, we are proud to announce the launch of our groundbreaking product, the ATEQ Elevator Feel Computer Test Box. This cutting-edge solution sets a new standard in the aviation industry by providing unparalleled air and hydraulic testing in a compact electric and easy to use format. ATEQ Aviation proves once again its leadin...

(Les Clayes-sous-Bois – France, April 2023) – After introducing to the market in May 2021 its latest Battery Charger analyser the ATEQ BCA, ATEQ Aviation (www.ateq-aviation.com) is glad to complete its battery testing solution portfolio with the addition of two new models, which this time, will be dedicated to lead acid batteries. ATEQ Aviation is glad to launch its bra...

(Les Clayes-sous-Bois – France, April 2023) – After introducing to the market in May 2021 its latest Battery Charger analyser the ATEQ BCA, ATEQ Aviation (www.ateq-aviation.com) is glad to complete its battery testing solution portfolio with the addition of two new models, which this time, will be dedicated to lead acid batteries. ATEQ Aviation is glad to launch its bra...

EP-M1550 uses a large building envelope and 16-laser system to ensure high-efficiency production. The multi-laser precise positioning and innovative area splicing control technology offer uniformity and stability throughout the whole printing phase. Compatible with titanium alloy, aluminum alloy, nickel alloy, maraging steel, stainless steel and cobalt chrome, etc. EP-M...

The EP-M1550 features a build volume of 1558 x 1558 x 1200 mm, which can be extended to 2000 mm in height, making it suitable for large aerospace parts like the stainless steel impeller. The EP-M1550 is a remarkable technology breakthrough which advances the global large-format metal AM to the next level.

EP-M650 adopts MPBF (Metal Powder Bed Fusion) technology, with a 655 x 655 x 800 mm3 build envelope and four laser systems to ensure a high-efficiency printing production. The precise positioning and innovative area splicing control technology hereby offer uniformity and stability throughout the whole printing phase.

Eplus3D's metal 3D printing technology has developed many successful cooperations in the aviation field. Our equipment such as EP-M450, EP-M650, EP-M1250, etc. can meet the efficient manufacturing of complex large metal parts. In order to achieve efficient production and quality, our equipment uses multi-laser and precision control technology, which can print a variety o...

Due to holes, fuel pipes, swirling blades, and complex internal channels, the nozzle needs to be separated into several parts for processing. In the process of machining and assembly, a number of processes need to be designed to ensure the size, accuracy, roughness, and sealing requirements. Fuel nozzle is one of the most critical components in the combustion chamber. It...

For the Aero industry, the most commonly used metal powders are titanium alloy, nickel alloy, stainless steel, aluminum alloy, and copper alloy. And each of them has different properties, which decides what they can print.

EP-M650 adopts MPBF (Metal Powder Bed Fusion) technology, with a 655 x 655 x 800 mm3 build envelope and four laser systems to ensure a high-efficiency printing production. The precise positioning and innovative area splicing control technology hereby offer uniformity and stability throughout the whole printing phase.

Master Bond Supreme 42HT-2ND Black is a two-part, non-drip epoxy system designed for bonding, sealing and coating applications. It is capable of withstanding temperatures up to 450°F (232°C), and provides a glass transition temperature (Tg) of 130-135°C. The material meets NASA low outgassing standards and is recommended for applications that require vacuum compatibility...

It has a thixotropic paste consistency making it ideal for bonding, sealing and gap filling applications. These properties are especially useful for opto-electronics or applications needing high dimensional stability and good heat resistance. EP5LTE-100 passes NASA low outgassing specifications. It provides a tensile modulus that exceeds 1 million psi at room temperatur...

At Multiax we have been pioneering the special technology of cutting with ultrasonic units, applied to cutting of honeycomb and other core materials, testing and delivering this innovative process since several years. We found that a hybrid process allows to machine complex parts thanks to the possibility to perform the classic CNC machining with standard honeycomb tool...

EP5TC-80 requires a cure at only 80°C for 1.5 to 2 hours. To optimize performance properties a post cure of 1-2 hours at 80°C is recommended. Featuring a thixotropic paste consistency, this compound adheres well to a variety of substrates such as metals, composites, glass, ceramics, and many plastics. It is formulated for bonding, sealing and small encapsulating applicat...

This electrically insulating and thermally conductive compound meets NASA low outgassing specifications and can be used in the aerospace, electronic, opto-electronic and specialty OEM industries. This system has a thermal conductivity of 1.15-1.30 W/(m•K). It is highly flexible with a low tensile modulus of 500-700 psi, an elongation of 50-60%, and a hardness of 70-75 S...

Creaform, the worldwide leader in automated and portable 3D measurement solutions and engineering services, announced today the latest addition to its HandySCAN 3D line-up offer, the SILVER series. With more than 5000 users already, this proven, trusted and patented technology is the industry standard in portable metrology-grade 3D scanners. It will now be available at a...

Some of the ideas that contributed to the success of the previous Matrix 1000 have withstood the test of time, while others have been reviewed and updated. In fact, although it was designed for mould&die makers, it has been particularly successful also in the aeronautical world. Some solutions designed for modularity have an impact on costs so the machine concept h...