#Industry News
JSTY5040JCSE Conveyor belt loader(Electric) Technical Specification
JSTY5040JCSE Conveyor belt loader(Electric) Technical Specification
Product Standard
IATA AHM 905 Reference Material for Civil Aircraft Ramp Support Equipment
IATA AHM 910 Basic requirements for airport ground support equipment
IATA AHM 913 Basic safety requirements for airport ground support equipment
IATA AHM-925 Technical Specification for Self-driven Conveyor Loaders
MH/T 6030-2014 Conveyor belt loader
AC-137-CA-2015-17 Specification for the testing of Conveyor belt loader
GB/T 18488-2006 Electric motors and their controllers for electric vehicles
GB/T 24347-2009 DC/DC converter for electric vehicles
GB/T 18384-2001 Safety requirements for electric vehicles
GB/T 18487-2001 Conductive charging system for electric vehicles
GB/T 20234-2015 Connection devices for conductive charging of electric vehicles
GB/T 27930-2011 Communication protocol between non-vehicle-mounted conductive charger and battery management system for electric vehicles
DB11/Z993-2013 Technical specification for electric vehicle remote service and management system
Main Parameters
Vehicle length×width×height (mm): 8200×2150×1990
Wheelbase (mm) 2900
Wheelbase front/rear (mm) 1730/1680
Approach angle (°) 10.5
Outer diameter of passage circle (mm) 16200
Departure angle (°) 31
Longitudinal passing angle (°) 20
Vehicle mass (kg) 3240
Maximum speed (km/h) 25
Minimum stabilised speed (km/h) 0.5
Range (km ) 255
Range (large airports) ( km+t) 203+300
Range (medium airports) ( km+t) 199+297
Range (small airports) ( km+t) 197+297
Drive motor power (kw) 30
Energy storage device assembly Ningde Times (kwh) 60.16
Discharge energy density PED=157.18WH/KG
Conveyor frame length (mm) 8200
Conveyor width 700
Maximum front end 4300
Lowest front end 1100
Rear maximum 1530
Lowest rear end 480
Total weight of conveyor belt when flat (kg) 1080
Maximum total weight per piece at angle (kg) 400
Conveyor speed (m-s) 0.16-0.5
Applicable temperature conditions -35-65
